SwimmingPool A2Z

How to maintain salt water pool?

How to maintain salt water pool? You’re reading this article that means you’re looking for the effective ways to maintain your saltwater pool. Anyway, you’ve landed the right article.

To keep it in tip-top shape, you should know how to maintain salt water pool. That said, let’s talk about some tips for care and maintenance so that you can enjoy your pool of saltwater for a long time.

What Are The Essential Salt Water Pool Maintenance Tips?

Check the Pump and Filter

When all the pool parts fit well, saltwater pool cleaning is a breeze. So, keeping your pump, filter, and skimmer clean and in good working condition is crucial.

These components work together to help keep the water in your pool clear. So make sure that these are tested and washed regularly, as over time they can get clogged with dirt.

Often, every few months, make sure to clean the generator cell of the pool as it can get scaly from salt accumulation.

Maintain Proper Salt Level

While the exact amount varies from manufacturer to manufacturer, most use approximately 3400 ppm. To function at all, salt chlorine generators need at least 3000 ppm.

You will need to add pool salt before it reaches the starting stage if your salt level is too low to start with. To find out how much to add, please use our calculator.

Maintain the pH Levels

For a saltwater lake, the ideal pH is 7.4. This number naturally fluctuates over time and will increase continuously in saltwater pools. You have to keep an eye on this and use your choice of instruments to minimize it as needed.

Balance Alkalinity Level

Alkalinity needs to be balanced to its correct level similar to pH. Alkalinity helps preserve the balance of your pH. Your degree of alkalinity can vary from 80-120 ppm.

Use the Pool Check 4 in 1 Chlorine Test strips included in the package to assess the established alkalinity level. If the amount of alkalinity is too high, carry it down with the alkalinity reducer.

If the alkalinity level is too low, use the alkalinity booster to increase it.

Use Saltwater Stabilizer

The stabilizer helps to protect chlorine from dissipation caused by sunlight in pool water. If strong sunlight causes difficulties preserving residual chlorine, you can use the stabilizer.

Use the pool control Chlorine test strips included in the package to assess the present stabilizer level. For a saltwater lake, the optimal range is 60 to 80 ppm.

Use your circulation system to slowly incorporate this substance into the pool water. To decide how much stabilizer you can use, follow the chart on the bottle.

Maintenance Suggestion of a Salt-Water Pool on Daily, Weekly, and Monthly Basis

Daily Basis

As this will help you save time and money, you should make it a habit to clean your pool and filters regularly.

But your everyday tasks include clearing the skimmer, emptying the pump basket, scrapping any visible debris. Make sure not to forget to clean the skimmer and clear the pump basket for your saltwater pool.

Remember to skim them if you see any visible debris. With these everyday tasks, aim to be as careful as you can to make your weekly and monthly tasks a lot simpler.

Weekly Basis

The pH of your saltwater pool and free chlorine should be checked every week. For this, there are test strips or test kits you can purchase. Verify that the pump and filter are running properly.

As required, you need to check the water chemistry and balance.

To make sure that the pH is in the optimal range and that the free chlorine level is right, use test strips or a drop kit. The standard amount of free chlorine is 1 to 3 ppm, while the pH should be 7.2 to 7.6.

If your chlorine level is off, change your generator. As for the pH level of your pool, you can either use baking soda to increase it or to lower it with sodium carbonate or muriatic acid.

You may also like: How to maintain swimming pool in winter?

Monthly Basis

Salt levels should be tested to make sure they are within the manufacturer’s specified range. The salinity of your pool can vary between 2700 and 4500 ppm.

To be sure that there might be minor variations, you must review your owner’s manual. When your generator doesn’t come with one, you can use a salt meter for this.

Maintaining the swimming pool automatically is not dream now. Here are some of the best pool & spa automation system.
Best Pool and Spa Automation System

Proper amounts are between 80 and 120 ppm concerning alkalinity. Again you can use baking soda to lift it or to lower it with muriatic acid.

The recommended stabilizer for saltwater pools is cyanuric acid or CYA, and it should be 70 to 80 ppm. The calcium hardness is last but not least. For scaling and corrosion prevention, you can strive for 200 to 400 ppm of calcium.

sunny